Do not you know how to choose the CheckPoint 156-315 exam dumps? Being worried about your CheckPoint 156-315 exam? Just try Flydumps new version CheckPoint 156-315 exam dumps.High pass rate and money back guarantee!

In the following cluster configuration; if you reboot sglondon_1 which device will be active when sglondon_1 is back up and running? Why?
A. sglondon_1 because it the first configured object with the lowest IP.
B. sglondon_2 because sglondon_1 has highest IP.
C. sglondon_1, because it is up again, sglondon_2 took over during reboot.
D. sglondon_2 because it has highest priority.

Correct Answer: D QUESTION 2
You find that Gateway fw2 can NOT be added to the cluster object.

What are possible reasons for that?
1) fw2 is a member in a VPN community. 2) ClusterXL software blade is not enabled on fw2. 3) fw2 is a DAIP Gateway.
A. 2 or 3
B. 1 or 2
C. 1 or 3
D. All

Correct Answer: C QUESTION 3
Review the Rule Base displayed.

For which rules will the connection templates be generated in SecureXL?
A. Rules 2 and 5
B. Rules 2 through 5
C. Rule 2 only
D. All rules except Rule 3

Correct Answer: D QUESTION 4
You are trying to configure Directional VPN Rule Match in the Rule Base. But the Match column does not
have the option to see the Directional Match. You see the following window.
What must you enable to see the Directional Match?

A. directional_match(true) in the objects_5_0.C file on Security Management Server
B. VPN Directional Match on the Gateway object’s VPN tab
C. VPN Directional Match on the VPN advanced window, in Global Properties
D. Advanced Routing on each Security Gateway

Correct Answer: C QUESTION 5
MultiCorp is running Smartcenter R71 on an IPSO platform and wants to upgrade to a new Appliance with R77. Which migration tool is recommended?
A. Download Migration Tool R77 for IPSO and Splat/Linux from Check Point website.
B. Use already installed Migration Tool.
C. Use Migration Tool from CD/ISO
D. Fetch Migration Tool R71 for IPSO and Migration Tool R77 for Splat/Linux from CheckPoint website

Correct Answer: A QUESTION 6
MegaCorp is running Smartcenter R70, some Gateways at R65 and some other Gateways with R60. Management wants to upgrade to the most comprehensive IPv6 support. What should the administrator do first?
A. Upgrade Smartcenter to R77 first.
B. Upgrade R60-Gateways to R65.
C. Upgrade every unit directly to R77.
D. Check the ReleaseNotes to verify that every step is supported.

Correct Answer: D QUESTION 7
MicroCorp experienced a security appliance failure. (LEDs of all NICs are off.) The age of the unit required that the RMA-unit be a different model. Will a revert to an existing snapshot bring the new unit up and running?
A. There is no dynamic update at reboot.
B. No. The revert will most probably not match to hard disk.
C. Yes. Everything is dynamically updated at reboot.
D. No. At installation the necessary hardware support is selected. The snapshot saves this state.

Correct Answer: D QUESTION 8
Which is the lowest Gateway version manageable by SmartCenter R77?
A. R65
B. S71
C. R55
D. R60A

Correct Answer: A QUESTION 9
Can you implement a complete IPv6 deployment without IPv4 addresses?
A. No. SmartCenter cannot be accessed from everywhere on the Internet.
B. Yes. Only one TCP stack (IPv6 or IPv4) can be used at the same time.
C. Yes, There is no requirement for managing IPv4 addresses.
D. No. IPv4 addresses are required for management.

Correct Answer: C QUESTION 10
A ClusterXL configuration is limited to ___ members.
A. There is no limit.
B. 16
C. 6
D. 2

Correct Answer: C QUESTION 11
Select the command set best used to verify proper failover function of a new ClusterXL configuration.
A. reboot
B. cphaprob -d failDevice -s problem -t 0 register / cphaprob -d failDevice unregister
C. clusterXL_admin down / clusterXL_admin up
D. cpstop/cpstart

Correct Answer: C QUESTION 12
You are troubleshooting a HTTP connection problem. You’ve started fw monitor -o http.pcap. When you open http.pcap with Wireshark there is only one line. What is the most likely reason?
A. fw monitor was restricted to the wrong interface.
B. Like SmartView Tracker only the first packet of a connection will be captured by fw monitor.
C. By default only SYN pakets are captured.
D. Acceleration was turned on and therefore fw monitor sees only SYN.

Correct Answer: D QUESTION 13
Which two processes are responsible on handling Identity Awareness?
A. pdp and lad
B. pdp and pdp-11
C. pep and lad
D. pdp and pep

Correct Answer: D QUESTION 14
Which three of the following are ClusterXL member requirements? 1) same operating systems 2) same Check Point version 3) same appliance model 4) same policy
A. 1, 3, and 4
B. 1, 2, and 4
C. 2, 3, and 4
D. 1, 2, and 3

Correct Answer: B QUESTION 15
You run cphaprob -a if. When you review the output, you find the word DOWN. What does DOWN mean?
A. The cluster link is down.
B. The physical interface is administratively set to DOWN.
C. The physical interface is down.
D. CCP pakets couldn’t be sent to or didn’t arrive from neighbor member.

Correct Answer: D
Which three of the following components are required to get a SmartEvent up and running? 1) SmartEvent SIC 2) SmartEvent Correlation Unit 3) SmartEvent Server 4) SmartEvent Analyzer 5) SmartEvent Client
A. 2, 3, and 5
B. 1, 2, and 4
C. 1, 2, and 3
D. 3, 4, and 5

Correct Answer: A
MegaCorp is using SmartCenter Server with several gateways. Their requirements result in a heavy log load. Would it be feasible to add the SmartEvent Correlation Unit and SmartEvent Server to their SmartCenter Server?
A. No. SmartCenter SIC will interfere with the function of SmartEvent.
B. No. If SmartCenter is already under stress, the use of a separate server for SmartEvent is recommended.
C. No, SmartEvent and Smartcenter cannot be installed on the same machine at the same time.
D. Yes. SmartEvent must be installed on your SmartCenter Server.

Correct Answer: B
Which Check Point tool allows you to open a debug file and see the VPN packet exchange details.
A. PacketDebug.exe
B. VPNDebugger.exe
C. IkeView.exe
D. IPSECDebug.exe

Correct Answer: C
When a packet is flowing through the security gateway, which one of the following is a valid inspection path?
A. Acceleration Path
B. Small Path
C. Firewall Path
D. Medium Path

Correct Answer: D
To run GAiA in 64bit mode, which of the following is true? 1) Run set edition default 64-bit.
2) Install more than 4 GB RAM. 3) Install more than 4 TB of Hard Disk.
A. 1 and 3
B. 1 and 2
C. 2 and 3
D. 1, 2, and 3

Correct Answer: B

Flydumps only provides CheckPoint 156-315 Practice Exams with highest quality for the candidates,because all CheckPoint 156-315 questions are written by most experienced experts who are really responsible.

Do not worry about your CheckPoint 156-315 exam,Flydumps now has published the new veriosn heckPoint 156-315 exam dumps with more new added questions and answers,also you can free download heckPoint 156-315 vce test software and pdf dumps on

What is a task of the SmartEvent Server?
A. Assign a severity level to an event.
B. Display the received events.
C. Analyze each IPS log entry as it enters the Log server.
D. Forward what is known as an event to the SmartEvent Server.
Answer: A Explanation:
What is a task of the SmartEvent Client?
A. Add events to the events database.
B. Display the received events.
C. Assign a severity level to an event.
D. Analyze each IPS log entry as it enters the Log server.
Answer: B Explanation:
Which of the following functions CANNOT be performed in ClientInfo on computer information collected?
A. Copy the contents of the selected cells.
Checkpoint 156-315.75 Exam
B. Save the information in the active tab to an .exe file.
C. Enter new credential for accessing the computer information.
D. Run search using the contents of the selected cell.
Answer: B Explanation:
What is the SmartEvent Analyzer’s function?
A. Analyze log entries, looking for Event Policy patterns.
B. Generate a threat analysis report from the Analyzer database.
C. Display received threats and tune the Events Policy.
D. Assign severity levels to events.
Answer: D Explanation:
How many pre-defined exclusions are included by default in SmartEvent R71 as part of the
product installation?
A. 3
B. 0
C. 10
D. 5
Answer: A Explanation:
What is the purpose of the pre-defined exclusions included with SmartEvent R71?
A. To give samples of how to write your own exclusion.
B. To avoid incorrect event generation by the default IPS event definition; a scenario that may
Checkpoint 156-315.75 Exam
occur in deployments that include Security Gateways of versions prior to R71.
C. To allow SmartEvent R71 to function properly with all other R71 release devices.
D. As a base for starting and building exclusions.
Answer: B Explanation:
You have selected the event Port Scan from Internal Network in SmartEvent, to detect an event when 30 port scans have occurred within 60 seconds. You also want to detect two port scans from a host within 10 seconds of each other. How would you accomplish this?
A. Select the two port-scan detections as a sub-event.
B. Define the two port-scan detections as an exception.
C. You cannot set SmartEvent to detect two port scans from a host within 10 seconds of each other.
D. Select the two port-scan detections as a new event.
Answer: B Explanation:
What is the benefit to running SmartEvent in Learning Mode?
A. To run SmartEvent, with a step-by-step online configuration guide for training/setup purposes
B. There is no SmartEvent Learning Mode
C. To run SmartEvent with preloaded sample data in a test environment
D. To generate a report with system Event Policy modification suggestions
Answer: D Explanation:
To backup all events stored in the SmartEvent Server, you should back up the contents of which folder(s)?
Checkpoint 156-315.75 Exam
A. $FWDIR/distrib_db and $FWDIR/events
B. $FWDIR/events_db
C. $FWDIR/distrib and $FWDIR/events_db
D. $FWDIR/distrib
Answer: C Explanation:
Which of the following generates a SmartEvent Report from its SQL database?
A. Security Management Server
B. SmartEvent Client
C. SmartReporter
D. SmartDashboard Log Consolidator
Answer: C Explanation:
Which of the following statements about the Port Scanning feature of IPS is TRUE?
A. The default scan detection is when more than 500 open inactive ports are open for a period of 120 seconds.
B. The Port Scanning feature actively blocks the scanning, and sends an alert to SmartView Monitor.
C. Port Scanning does not block scanning; it detects port scans with one of three levels of detection sensitivity.
D. When a port scan is detected, only a log is issued, never an alert.
Answer: C helps millions of candidates pass CheckPoint 156-315 exams and get the certifications.We have tens of thousands of successful stories.Our dumps are reliable,affordable,updated and of really best quality to overcome the difficulties of any IT certifications. exam dumps are latest updated in highly outclass manner on regular basis and material is released periodically.Latest CheckPoint 156-315 are available in testing centers with whom we are maintaining our relationship to get latest material.