New VCE and PDF– You can prepare Cisco 200-310 exam in an easy way with Flydumps Cisco 200-310 questions and answers.By training our vce dumps with all Cisco 200-310 the latest questions,you can pass the exam in the first attempt.
QUESTION 1
What information should be utilized to identify network applications that are running on an existing network infrastructure?
A. customer information
B. existing documentation
C. traffic analysis
D. external feedback
E. user feedback Correct Answer: C QUESTION 2
What are two benefits of a structured IPv4 addressing scheme? (Choose two.)
A. reduces routing table size
B. provides increased security
C. allows for address translation to be performed
D. improves manageability and troubleshooting
E. increases high availability Correct Answer: AD QUESTION 3
Which IP address can be routed to cross the public Internet?
A. 10.31.1.1
B. 192.168.32.1
C. 172.32.1.1
D. 169.254.32.1
Correct Answer: C QUESTION 4
A dynamically routed private line and a statically routed IPsec tunnel connect two offices. What routing configuration prefers the IPsec tunnel only in the event of a private line failure?
A. floating static entry
B. EIGRP variance
C. bandwidth metric
D. OSPF maximum paths
Correct Answer: A QUESTION 5
Which interior routing protocol has the most preferable administrative distance by default?
A. RIP
B. OSPF
C. EIGRP
D. BGP
E. IS-IS
Correct Answer: C QUESTION 6
You design a network with the following network addresses:
192.168.168.0
192.168.169.0
192.168.170.0
192.168.171.0
192.168.172.0
192.168.173.0
192.168.174.0
192.168.175.0
Which route address is the best summary of these network addresses?
A. 192.168.0.0/24
B. 192.168.171.128/3
C. 192.168.168.0/21
D. 192.168.175.0/3
E. 192.168.0.0/16 Correct Answer: C QUESTION 7
What design requirement is necessary for campus network access layer switching?
A. high cost per port
B. high availability
C. high scalability
D. high performance
Correct Answer: C
QUESTION 8
In which phase of PPDIOO are the network requirements identified?
A. Design
B. Plan
C. Prepare
D. Implement
E. Operate
F. Optimize
Correct Answer: B
QUESTION 9
Which IPv6 feature enables routing to distribute connection requests to the nearest content server?
A. Link-local
B. Site-local
C. Anycast
D. Multicast
E. Global aggregatable
Correct Answer: C
QUESTION 10
Refer to the exhibit.
A network engineer at a technical call center receives a call from a customer complaining that only 56 kbps of data can be transferred over the T1 Frame Relay WAN circuit at a remote site. The engineer checks the Frame Relay switch and confirms that only 56 kbps is being transferred over the circuit. The engineer requests the router configuration of the customer headquarters site router. What is causing this issue to occur?
A. The wrong CIR is configured.
B. The BECN configuration is causing this issue.
C. The class name is spelled wrong under the interface.
D. The wrong DLCI number is assigned to the interface. Correct Answer: C QUESTION 11
Refer to the exhibit.
Which layer is the distribution layer?
A. Layer A
B. Layer B
C. Layer C
D. Layers A and B form a consolidated core and distribution layer
Correct Answer: B QUESTION 12
Refer to the exhibit.
Which configuration can be used to implement FHRP protocol and load balancing at the same time?
A. R1Interface Ethernet0ip address 171.16.6.5 255.255.255.0standby 1 preemptstandby 1 ip 171.16.6.100standby 1 track Serial0standby 2 preemptstandby 2 ip 171.16.6.200standby 2 track serial 0standby 2 priority 95!!R2interface Ethernet0ip address 171.16.6.6 255.255.255.0standby 1 preemptstandby 1 ip 171.16.6.100standby 1 track Serial0standby 1 priority 95standby 2 preemptstandby 2 ip 171.16.6.200standby 2 track serial 0
B. R1Interface Ethernet0ip address 171.16.6.5 255.255.255.0standby 1 preemptstandby 1 ip 171.16.6.100standby 1 track Serial0standby 1 priority 95!!R2interface Ethernet0ip address 171.16.6.6 255.255.255.0standby 1 preemptstandby 1 ip 171.16.6.100standby 1 track Serial0standby 1 priority 95
C. R1Interface Ethernet0ip address 171.16.6.5 255.255.255.0standby 1 preemptstandby 1 ip 171.16.6.100standby 1 track Serial0standby 1 priority 95standby 2 preemptstandby 2 ip 171.16.6.200standby 2 track serial 0standby 2 priority 95!!R2interface Ethernet0ip address 171.16.6.6 255.255.255.0standby 1 preemptstandby 1 ip 171.16.6.100standby 1 track Serial0standby 2 preemptstandby 2 ip 171.16.6.200standby 2 track serial 0
D. R1Interface Ethernet0ip address 171.16.6.5 255.255.255.0standby 1 preemptstandby 1 ip 171.16.6.100standby 1 track Serial0standby 1 priority 95!!R2interface Ethernet0ip address 171.16.6.6 255.255.255.0standby 1 preemptstandby 1 ip 171.16.6.100
Correct Answer: A
QUESTION 13
What two factors should be considered when deploying an enterprise campus network? (Choose two.)
A. employees
B. geography
C. applications
D. administration
E. throughput
Correct Answer: BC
QUESTION 14
Which network layer is the best fit for security features such as DAI and DHCP snooping?
A. campus core
B. enterprise edge
C. campus distribution
D. remote-access VPN
E. enterprise data center
F. campus access
Correct Answer: F
QUESTION 15
A network engineer requires that an OSPF ASBR must only flood external LSAs only within its own area. What OSPF area type should be configured?
A. Backbone Area
B. Totally Stub Area
C. Not So Stubby Area
D. Stub Area
Correct Answer: C
QUESTION 16
A network engineer requires that an OSPF ASBR must only flood external LSAs only within its own area. What OSPF area type should be configured?
A. Backbone Area
B. Totally Stub Area
C. Not So Stubby Area
D. Stub Area
Correct Answer: C
QUESTION 17
Which protocol is used to reserve bandwidth for the transport of a particular application data flow across the network?
A. cRTP
B. IEEE 802.1P
C. RSVP
D. LFI
E. Auto QOS
Correct Answer: C
QUESTION 18
An enterprise campus module is typically made up of four submodules, as described by the Cisco Enterprise Architecture Model. Which two submodules are part of this module? (Choose two.)
A. DMZ
B. enterprise branch
C. building distribution
D. server farm/data center
E. MAN
Correct Answer: CD
QUESTION 19
You want to gather as much detail as possible during a network audit, to include data time stamping across a large number of interfaces, customized according to interface, with a minimal impact on the network devices themselves. Which tool would you use to meet these requirements?
A. RMON
B. SNMPv3
C. NetFlow
D. Cisco Discovery Protocol
Correct Answer: C
QUESTION 20
Which design is the recommended geometric design for routed topologies?
A. linear
B. triangular
C. rectangular
D. circular
Correct Answer: B
QUESTION 21
Which statement is true concerning the data center access layer design?
A. The access layer in the data center is typically built at Layer 3, which allows for better sharing of services across multiple servers.
B. With Layer 2 access, the default gateway for the servers can be configured at the access or aggregation layer.
C. A dual-homing NIC requires a VLAN or trunk between the two access switches to support the dual IP addresses on the two server links to two separate switches.
D. The access layer is normally not required, as dual homing is standard from the servers to the aggregation layer.
Correct Answer: B
Latest Cisco 200-310 Dumps For exam Questions.Download dumps for the Cisco 200-310 and Pass Easily Your Exams.Guaranteed Cisco 200-310 Testing Engine.