Is here someone that holds the Cisco 200-105 dumps? We believe in “Actions speak louder than words” that’s why Pass4itsure recommend you to must try its free demo, you will notice the intuitive UI and also you will find it very easy to customize the preparation mode. The Interconnecting Cisco Networking Devices Part 2 (ICND2 v3.0) (200-105 ICND2) exam is a 90 Minutes (45-55 questions) assessment in pass4itsure that is associated with the CCNA Routing & Switching certification. 100% pass guarantee interactive Cisco 200-105 dumps ICND2 exam pdf-answers questions with downloadable Youtube training online. “Interconnecting Cisco Networking Devices Part 2 (ICND2 v3.0)” is the exam name of Pass4itsure Cisco 200-105 dumps test which designed to help candidates prepare for and pass the Cisco 200-105 exam. The interface of https://www.pass4itsure.com/200-105.html dumps practice exam software is user-friendly. It has various self-learning and self-evaluation features, including; timed exams and randomized questions.
[New Pass4itsure 200-105 Dumps Updated January From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWWWw0QXQxY3R1X1E
[New Pass4itsure 200-125 Dumps Updated January From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWT2VSaUVoODRKR1k
Pass4itusre Latest and Most Accurate Cisco 200-105 Dumps Exam Q&As(42-63)
QUESTION 42
Which commands are required to properly configure a router to run OSPF and to add network 192.168.16.0/24 to OSPF area 0? (Choose two.)
A. Router(config)# router ospf 0
B. Router(config)# router ospf 1
C. Router(config)# router ospf area 0
D. Router(config-router)# network 192.168.16.0 0.0.0.255 0
E. Router(config-router)# network 192.168.16.0 0.0.0.255 area 0
F. Router(config-router)# network 192.168.16.0 255.255.255.0 area 0
200-105 exam Correct Answer: BE
Explanation/Reference:
In the router ospf
Command, the ranges from 1 to 65535 so o is an invalid number – B is correct but A is not correct. To configure OSPF, we need a wildcard in the andquot;network” stat
QUESTION 43
Which statement is true, as relates to classful or classless routing?
A. Classful routing protocols send the subnet mask in routing updates.
B. RIPv1 and OSPF are classless routing protocols.
C. Automatic summarization at classful boundaries can cause problems on discontiguous subnets.
D. EIGRP and OSPF are classful routing protocols and summarize routes by default.
Correct Answer: C
Explanation
Explanation/Reference:
Explanation: RIPv1, RIPv2, IGRP, and EIGRP all auto-summarize classful boundaries by default (OSPF do
QUESTION 44
What does a router do if it has no EIGRP feasible successor route to a destination network and the successor route to that destination network is in active status?
A. It routes all traffic that is addressed to the destination network to the interface indicated in the routing table.
B. It sends a copy of its neighbor table to all adjacent routers.
C. It sends a multicast query packet to all adjacent neighbors requesting available routing paths to the destination network.
D. It broadcasts Hello packets to all routers in the network to re-establish neighbor adjacencies.
200-105 dumps Correct Answer: C
Explanation/Reference:
QUESTION 45
Which statement about named ACLs is true?
A. They support standard and extended ACLs.
B. They are used to filter usernames and passwords for Telnet and SSH.
C. They are used to filter Layer 7 traffic.
D. They support standard ACLs only.
E. They are used to rate limit traffic destined to targeted networks.
Correct Answer: A
Explanation/Reference:
Named Access Control Lists (ACLs) allows standard and extended ACLs to be given names instead of numbers. Unlike in numbered Access Control Lists (ACLs), we can edit Named Access Control Lists. Anoth
QUESTION 46
What does the frame-relay interface-dlci command configure?
A. local DLCI on the subinterface
B. remote DLCI on the main interface
C. remote DCLI on the subinterface
D. local DLCI on the main interface
200-105 pdf Correct Answer: A
Explanation/Reference:
QUESTION 47
Peter is your new Security Administrator. On his first working day, he is very nervous and enters the wrong password three times. His account is locked. What can be done to unlock Peter’s account? Give the BEST answer.
A. It is not possible to unlock Peter’s account. You have to install the firewall once again or abstain from Peter’s help.
B. You can unlock Peter’s account by using the command fwm unlock_admin -u Peter on the Security Gateway.
C. You can unlock Peter’s account by using the command fwm lock_admin -u Peter on the Security Management Server.
D. You can unlock Peter’s account by using the command fwm unlock_admin -u Peter on the Security Management Server
Correct Answer: C
Explanation
Explanation/Reference:
QUESTION 48
Where can you find the Check Point’s SNMP MIB file?
A. $CPDIR/lib/snmp/chkpt.mib
B. There is no specific MIB file for Check Point products.
C. $FWDIR/conf/snmp.mib
D. It is obtained only by request from the TAC.
200-105 vce Correct Answer: A
Explanation
Explanation/Reference:
QUESTION 49
You want to generate a cpinfo file via CLI on a system running GAiA. This will take about 40 minutes since the log files are also needed. What action do you need to take regarding timeout?
A. Log in as Administrator, set the timeout to one hour with the command idle 60 and start cpinfo.
B. Log in as the default user expert and start cpinfo.
C. No action is needed because cpshell has a timeout of one hour by default.
D. Log in as admin, switch to expert mode, set the timeout to one hour with the command, idle 60, then start cpinfo.
Correct Answer: A
Explanation
Explanation/Reference:
QUESTION 50
Many companies have defined more than one administrator. To increase security, only one administrator should be able to install a Rule Base on a specific Firewall. How do you configure this?
A. Define a permission profile in SmartDashboard with read/write privileges, but restrict it to all other firewalls by placing them in the Policy Targets field. Then, an administrator with this permission profile cannot install a policy on any Firewall not listed here.
B. Put the one administrator in an Administrator group and configure this group in the specific Firewall object in Advanced > Permission to Install.
C. Right-click on the object representing the specific administrator, and select that Firewall in Policy Targets.
D. In the object General Properties representing the specific Firewall, go to the Software Blades product list and select Firewall. Right-click in the menu, select Administrator to Install to define only this administrator.
200-105 exam Correct Answer: B
Explanation
Explanation/Reference:
QUESTION 51
What is the officially accepted diagnostic tool for IP Appliance Support?
A. ipsoinfo
B. cpinfo
C. uag-diag
D. CST
Correct Answer: D
Explanation
Explanation/Reference:
QUESTION 52
ALL of the following options are provided by the SecurePlatform sysconfig utility, EXCEPT:
A. Export setup
B. Time & Date
C. DHCP Server configuration
D. GUI Clients
200-105 dumps Correct Answer: D
Explanation
Explanation/Reference:
QUESTION 53
Which of the following options is available with the GAiA cpconfig utility?
A. Time & Date
B. GUI Clients
C. DHCP Server configuration
D. Export setup
Correct Answer: B
Explanation
Explanation/Reference:
QUESTION 54
Which command would provide the most comprehensive diagnostic information to Check Point Technical Support?
A. cpstat – date.cpstat.txt
B. fw cpinfo
C. cpinfo -o date.cpinfo.txt
D. diag
200-105 pdf Correct Answer: C
Explanation
Explanation/Reference:
QUESTION 55
Which of the following statements accurately describes the command snapshot?
A. snapshot creates a Security Management Server full system-level backup on any OS.
B. snapshot stores only the system-configuration settings on the Gateway.
C. A Gateway snapshot includes configuration settings and Check Point product information from the remote Security Management Server.
D. snapshot creates a full OS-level backup, including network-interface data, Check Point product information, and configuration settings during an upgrade of a SecurePlatform Security Gateway.
Correct Answer: D
Explanation
Explanation/Reference:
QUESTION 56
How do you recover communications between your Security Management Server and Security Gateway if you lock yourself out through a rule or policy mis-configuration?
A. fw delete [email protected]
B. fw unload policy
C. fwm unloadlocal
D. fw unloadlocal
200-105 vce Correct Answer: D
Explanation
Explanation/Reference:
QUESTION 57
How can you check whether IP forwarding is enabled on an IP Security Appliance?
A. clish -c show routing active enable
B. ipsofwd list
C. cat /proc/sys/net/ipv4/ip_forward
D. echo 1 > /proc/sys/net/ipv4/ip_forward
Correct Answer: B
Explanation
Explanation/Reference:
QUESTION 58
Which command allows you to view the contents of an R76 table?
A. fw tab -s <tablename>
B. fw tab -t <tablename>
C. fw tab -x <tablename>
D. fw tab -a <tablename>
200-105 exam Correct Answer: B
Explanation
Explanation/Reference:
QUESTION 59
Which of the following tools is used to generate a Security Gateway R76 configuration report?
A. infoCP
B. cpinfo
C. infoview
D. fw cpinfo
Correct Answer: B
Explanation
Explanation/Reference:
QUESTION 60
Which of the following is a CLI command for Security Gateway R76?
A. fw merge
B. fw tab -u
C. fw shutdown
D. fwm policy_print <policyname>
200-105 dumps Correct Answer: B
Explanation
Explanation/Reference:
QUESTION 61
You are the Security Administrator for MegaCorp. A Check Point firewall is installed and in use on a platform using GAiA. You have trouble configuring the speed and duplex settings of your Ethernet interfaces. Which of the following commands can be used in Expert Mode to configure the speed and duplex settings of an Ethernet interface and will survive a reboot? Give the BEST answer.
A. eth_set
B. mii_tool
C. ifconfig -a
D. ethtool
Correct Answer: A
Explanation
Explanation/Reference:
QUESTION 62
John has scanned the web server with NMAP. However, he could not gather enough information to help him identify the operating system running on the remote host accurately.
What would you suggest to John to help identify the OS that is being used on the remote web server?
A. Connect to the web server with a browser and look at the web page.
B. Connect to the web server with an FTP client.
C. Telnet to port 8080 on the web server and look at the default page code.
D. Telnet to an open port and grab the banner.
200-105 pdf Correct Answer: D
Explanation
Explanation/Reference:
Explanation:
Most people don’t care about changing the banners presented by applications listening to open ports and therefore you should get fairly accurate information when grabbing banners from open ports with, for example, a telnet application.
QUESTION 63
An Nmap scan shows the following open ports, and nmap also reports that the OS guessing results to match too many signatures hence it cannot reliably be identified:
21 ftp
23 telnet
80 http
443 https
What does this suggest ?
A. This is a Windows Domain Controller
B. The host is not firewalled
C. The host is not a Linux or Solaris system
D. The host is not properly patched
Correct Answer: D
Explanation
Explanation/Reference:
Explanation:
If the answer was A nmap would guess it, it holds the MS signature database, the host not being firewalled makes no difference. The host is not linux or solaris, well it very well could be. The host is not properly patched? That is the closest; nmaps OS detection architecture is based solely off the TCP ISN issued by the operating systems TCP/IP stack, if the stack is modified to show output from randomized ISN’s or if your using a program to change the ISN then OS detection will fail. If the TCP/IP IP ID’s are modified then os detection could also fail, because the machine would most likely come back as being down.
See What Our Customers Are Saying:
We at Pass4itsure are committed to our customer’s success. There are 50,000+ customers who used this preparation material for the preparation of various certification exams and this number of customers is enough for new candidates to trust in these products.Our Cisco 200-105 dumps are created with utmost care and professionalism. We utilize the experience and knowledge of a team of industry professionals from leading organizations all over the world.
The randomize feature is helpful in selecting the Cisco 200-105 dumps exam questions according to your potential. “Interconnecting Cisco Networking Devices Part 2 (ICND2 v3.0)”, also known as 200-105 exam, is a Cisco certification which covers all the knowledge points of the real Cisco exam. And keep attempting the same question several time so you can overcome the exam anxiety. Pass4itsure Cisco 200-105 dumps exam questions answers are updated (204 Q&As) are verified by experts. But make sure that, the real 200-105 product has more features than the trial version. The associated certifications of 200-105 dumps is CCNA Routing & Switching. If, you are contented with its demo then you can purchase the actual https://www.pass4itsure.com/200-105.html dumps exam product.
Read More Youtube: https://youtu.be/ZeAu5mz1CUw
Compared with other brands, Pass4itsure has up to dated exam information, affordable price, instant exam PDF files downloadable, error correction, unlimited install,etc. Such as Pass4itsure 100% Pass Interconnecting Cisco Networking Devices Part 2 (ICND2 v3.0) Guarantee Interactive Cisco 200-105 Dumps ICND Exam PDF-Answers Questions with Downloadable Youtube Training Online. Simple and Easy! To take advantage of the guarantee, simply contact Customer Support, requesting the exam you would like to claim. Pass4itsure guarantee insures your success otherwise get your MONEYBACK!